PWM Controller for Programmable Power Converter (USBPD)


Update Alert Share

The RT7752GxP series with Quasi-Resonant mode (QR) is specifically designed to work with controllers, such as the RT7202, to provide a total solution for USB PD or a programmable power adapter. The RT7752GxP can achieve high efficiency, meet safety standards, and consume less than 50mW of power in a 5V standby condition.

The RT7752GxP includes several innovations in order to provide a solution with a wide range of output voltage. By utilizing the DMAG pin, the RT7752GxP senses output voltage to adjust loop gain for system stability, to adjust output over-voltage protection threshold voltage for protection of external devices, and to adjust current limit to meet Limited Power Source (LPS) safety requirements.

The RT7752GxP is also equipped with comprehensive protection features, including Bulk-Capacitor brown-in /brown-out protection, VDD over-voltage protection (VDD OVP), output over-voltage/under-voltage protection (Output OVP/UVP), secondary rectifier short-circuit protection (SRSP), and external over-temperature protection (External OTP). For constant output power regulation, a resistor connected to CS pin can be used to achieve accurate line compensation across the universal input voltage range. The RT7752GxP also provides various features to protect against failures occurring at the secondary-side component, such as the RT7202 or a shunt regulator.

The RT7752GxP and the RT7202 work together to realize a robust and safe design to prevent all the potential fault scenarios, which may arise from versatile and unknown connections to various devices, cables, plugs and receptacles.


  • USB PD and Programmable Power Adapters
Key Spec.
Status Active
Feedback Regulation Mode SSR
Switching Frequency_Normal (kHz) 83
Switching Frequency_Peak (kHz) 83
Peak load Application No
HV Start-up No
CCM/Valley Multi-mode QR/Valley Switching Multi-mode
Programmable Burst/Green-mode No
Brown-in/out Yes (Buck cap.Side)
OVP Adaptive OVP
External OTP Yes
UVLO ON (V) 14.5
VDD OVP (V) 44
Features Current Mode Control;Cycle-by-Cycle Current Limit;OCP;OVP;PWM;SCP;UVP
Package Type SOT-26
  • Optimized for Adaptive Output Power
    ► Wide VDD Range : 10V to 40V
    ► Adaptive Over-Current Protection
    ► Adaptive Loop Gain Control for Loop Stability
  • High Efficiency
    ► Green Mode Operation at Light Load and No Load
  • Comprehensive Protection Features
    ► Bulk-Capacitor Brown-In and Brown-Out Protection
    ► VDD Over-Voltage Protection
    ► Output Over-Voltage and Under-Voltage Protection
    ► External Over-Temperature Protection
    ► Secondary Rectifier Short-Circuit Protection
    ► Programmable Line Compensation
  • Others
    ► < 50mW in 5V Standby Mode for Power Saving
    ► Driver Capability : 300mA/-300mA
    ► SmartJitterTM Technology