Power switches are used to enable or disable a certain supply rail, often used as protection for USB ports. These devices have a slew-rate controlled switch-on action to eliminate inrush currents. They also include protection functions such as OVP, OTP and reverse current protection. With Richtek's various solutions, you can find the right product to meet USB 2.0 or USB 3.0 requirements.

The following is a list of products released in the last

Part NumberDescriptionShareDatasheetFree Sample
RT9752USB-C Controller + Power Switch with HV Protection Not available
RT2528A120mΩ, 2.5A Power Switch with Adjustable Current Limit Request

Technical Document Image Preview
Power switch with various protection functions

Power Switch ICs

Safety and reliability are important aspects of power supplies. Most converters will include protection features which safely shut down the supply in case of overload or too high operating temperature.

Power switches can be used to enable and disable power rails. The EN pin is used to activate the pass element which is usually a MOSFET with a special well construction to eliminate reverse current flow via the body diode. A current limit circuit will open the switch when output current exceeds the current limit threshold. The FAULT pin will be pulled low in case any of the protection functions is activated, and can be used to signal the system that a fault condition has been encountered.

Power switches are often used to protect USB ports, which have specific maximum current requirements and must be short-circuit proof. The main selection criteria for power switches is the current limit level, which can either be fixed or adjustable.

You might be interested in...

  • Parametric Search: Get your design started in no time!