23V, 10A, 500kHz ACOT® Synchronous Step-Down Converter


Update Alert Share

The RT6280B is a simple, easy-to-use, 10A synchronous step-down DC-DC converter with an input supply voltage range of 4.5V to 23V. The device build-in an accurate 0.6V reference voltage and integrates low RDS(ON) power MOSFETs to achieve high efficiency in a UQFN-12HL 3x3 package. The RT6280B adopts Advanced Constant On-Time (ACOT®) control architecture to provide an ultrafast transient response with few external components and to operate in nearly constant switching frequency over the line, load, and output voltage range. The RT6280B operates in forced PWM that helps meet tight voltage regulation accuracy requirements. The RT6280B senses both FETs current for a robust over-current protection. It features cycle-by-cycle current limit protection and prevent the device from the catastrophic damage in output short circuit, over current or inductor saturation. A built-in soft-start function prevents inrush current during start-up. The device also includes input under-voltage lockout, output under-voltage protection, over-voltage protection, and over-temperature protection (thermal shutdown) to provide safe and smooth operation in all operating conditions. The RT6280B is offered in a UQFN-12HL 3x3(FC) package.


  • Industrial and Commercial Low Power Systems
  • Computer Peripherals
  • LCD Monitors and TVs
  • Green Electronics/Appliances
  • Point of Load Regulation for High-Performance DSPs, FPGAs, and ASICs
  • Networking Communication
Key Spec.
Status Active
Vin (min) (V) 4.5
Vin (max) (V) 23
Number of Outputs 1
Vout (min) (V) 0.6
Vout (max) (V) 5.1
Output Adj. Method Resistor
Iout (max) (A) 10
Current Limit (typ) (A) 10;12;8
Freq (typ) (kHz) 500
Ext Sync No
Ron_HS (typ) (mOhm) 20
Ron_LS (typ) (mOhm) 10
Iq (typ) (mA) 0.13
Features ACOT Control;Adjustable Current Limit;Fast Transient Response;Force PWM;OCP;OVP;Power Good;UVP
Package Type UQFN3x3-12H(FC)
  • 10A Converter With Built-In 20mΩ/10mΩ Low RDS(ON) Power FETs
  • Input Supply Voltage Range : 4.5V to 23V
  • Output Voltage Range : 0.6V to 5.1V
  • Advanced Constant On-Time (ACOTTM) Control
    ► Ultrafast Transient Response
    ► No Needs For External Compensations
    ► Optimized for Low-ESR Ceramic Output Capacitors
  • 0.6V ±1% High-Accuracy Feedback Reference Voltage
  • Fixed Switching Frequency : 500kHz
  • Built-in Internally Fixed Soft-Start (Typ. 0.4ms)
  • Input Under-Voltage Lockout (UVLO)
  • Output Under-Voltage Protection (UVP) with Hiccup Mode
  • Output Over-Voltage Protection (OVP) with Auto-Recovery Mode
  • Available In UQFN-12HL 3x3 (FC) (U-Type) Package
TitleLast UpdateShareDownload
23V, 10A, 500kHz ACOT® Synchronous Step-Down Converter2018/06/04
Evaluation Boards
TitleLast UpdateShareDownload
RT6280BHGQUF Step-Down Converter Evaluation Board2018/11/08
Reference Design
TitleLast UpdateShareDownload
Richtek Load Transient Tool2019/01/09